Bendix-commercial-vehicle-systems SMARTIRE TPMS LF TOOL USERS MANUAL Manual de usuario descargar pdf (Pagina 5)

3. GETTING

STARTED

The SmarTire

™

by Bendix CVS LF tool is powered by a standard 9-Volt battery. To install the

battery, open the battery access panel on the back of the tool and connect the supplied battery to

the 9-Volt battery connector. Insert the battery into the slot and close the battery access panel.

Press and hold the ON/OFF button for 2 seconds to power up the tool.

4. USING THE SMARTIRE

™

LF TOOL

The SmarTire

™

LF tool is very easy to use. Simply hold it approximately 2 inches (5 cm) away from

the tire’s surface positioned at the center of the tire’s sidewall at the location of the valve stem

(SmarTire

™

sensors should be installed at the valve and their location should also be indicated by a

rim mounted label). Press and release the initiate/learn button (a single beep will be heard) and

hold the tool in place for 5 seconds until 4 quick beeps are heard to ensure the wireless signals

emitted from the tool reached the sensor.

1 2 3 4 5 6 7 8

Sin comentarios

Bendix-commercial-vehicle-systems SMARTIRE TPMS LF TOOL USERS MANUAL Manual de usuario Pagina 5